Feature	Details
Main Application	Installed in the rotor of Parker 103 crusher; crushes incoming stones by direct impact, producing cubical product suitable for construction and road materials.
Dimensions	60 × 185 × 590 mm (L × W × H)
Unit Weight	46.5 kg
Material	Manganese steel (DIN 1.3401); wear-resistant
Quantity per Machine	8 hammers in rotor (4 rows, 2 opposing hammers per row); total arms: 16 per set
Crushing Capacity	60–110 t/h (depending on feed material to Parker 103 crusher)
Key Advantages	High wear resistance, cannot be cast with molybdenum (manganese only), easy replacement, produces high-quality cubical aggregate with high durability

Additional information

Buying a check

Initial consultation and information exchange

Place an order

Product loading and shipping

24-hour response from NovinCSM

We are waiting for your call.

The Parker 103 hammer, due to its high hardness and low machinability, requires repair and refurbishment after wear and damage, which can be costly. Therefore, it is considered a consumable part and is typically replaced after a period of use.

Parker 103 vs Parker 104 Hammers

The Parker 103 hammer is a primary component of the Parker 103 Cubit crusher, produced by Novincsm in both 103 and 104 models. These crushers, with older designs and technology compared to NS and HS models, are heavier and are still used in some mines as secondary crushers.

Material and Alloy of Parker 103 Hammer

Unlike hammers for Cubit 120, 180, or HS7/HS10, which are made of Ni-Hard alloys, the Parker 103 hammer is made solely from manganese steel. Proper molybdenum content in the alloy improves its lifespan. Due to the specific design of the hammer, breakage risk in certain areas is high, and therefore Parker 103 hammers are not produced in high-chrome or Ni-Hard variants. Novincsm offers free technical consultation to guide selection and usage.

Performance of Parker 103 Hammer

In the Parker 103 crusher, the rotor holds 8 Parker 103 hammers in four opposing rows. As the rotor spins at high speed, these hammers strike the feed stones against the Parker anvils along the internal walls, performing the crushing process effectively.

Difference from Other Hammers

The Parker 103 hammer has two brackets that attach directly to the rotor, unlike other hammers that are placed in rotor slots in a magazine-style arrangement.

Manufacturer: Novincsm produces and supplies Parker 103 hammers with high-quality materials and standards. For further details or technical guidance, contact Novincsm directly.