HS 7 Kubit Hammer

The HS 7 Kubit Hammer is used in one of the heaviest types of impact crushers and is designed for crushing very hard stones at extremely high capacities. The HS impact crusher (Beringer type) is considered one of the most important crushing machines, and the HS 7 Kubit Hammer is among its key components.

The HS impact crusher is equipped with separate, interchangeable anvils, which allows the crushing process to be adjusted. By changing the HS anvils, it becomes possible to crush large and hard rocks efficiently and produce cubical-shaped sand with very high precision using this crusher. The type of anvil used has a direct impact on the performance of the HS impact crusher.

With HS anvils, sand can be produced in a wide range of gradations, and the output particle size can be adjusted with millimeter-level accuracy. Therefore, anvil selection plays a crucial role in determining the final product quality of the HS impact crusher.

Due to the very high abrasion involved, HS impact crusher components must have excellent wear resistance to increase their service life and durability. For this reason, iron or steel parts coated with manganese are commonly used. These components must also be structurally strong to withstand high loads and operating pressures without failure.

The HS impact crusher is a heavy-duty crushing machine and may be exposed to severe working conditions during operation. To prevent damage, proper maintenance is essential. Since the HS 7 Kubit Hammer is one of the main components of the HS7 crusher and is highly sensitive to wear when exposed to feed material, it is strongly recommended that all components—especially the bearings—be properly lubricated to ensure optimal performance.

The HS 7 Kubit Hammer is manufactured from Ni-Hard cast iron, manganese steel, or manganese–molybdenum steel. These materials provide very high wear resistance, significantly increasing durability and service life.

HS 7 Kubit Hammers and other HS crusher components are typically supplied in packs of 4 pieces, with an average total weight of approximately 500 kg. In the event of hammer wear or failure, replacing the HS 7 Kubit Hammer can significantly extend the operational life of the machine. Replacement and repair are usually carried out by referring to the crusher manufacturer or authorized service centers.

HS 7 Kubit Hammer Price

To design your production line in the most cost-effective way, you must consider the capacity of different machines and the production conditions of your plant. This allows you to make the best possible choice among various crushers and crusher spare parts available on the market.

HS 7 Kubit Hammer Purchase

For ordering and purchasing different types of crusher spare parts, including HS 7 Kubit Hammers, please contact our technical experts for professional consultation and support.